It would be a little annoying to think of the bacteria, viruses, stains and other cladding that cover our device.
Dust can cause amazing damage to your TV. Particles penetrate all cracks and crevices and stay there if you don’t do anything. Tap or click to see safe steps to clean up your TV port and make your screen shine..
Your TV probably doesn’t have annoying germs, but your phone is another story. Think of everything you touch in a day and all the time you grab your phone. Tap or click here for a guide to disinfect your smartphone without ruining it..
And you have your earphones. Unless cleaned regularly, the clad accumulates in an embarrassing way when seen by someone else. Here’s how to get rid of this:
Wipe off the clad
Compared to other gadgets, earphones are very uncomfortable. Collects dirt, skin particles, earwax, grease and sweat. They are like portable Petri dishes for our biological debris. Yes.
Fortunately, it’s not difficult to get rid of it all. First, grab the microfiber cloth.I like this 6 pack EliteTechGear, Available for less than $ 10.
Lightly moisten and wipe the cord and body of each earphone. These steps can also be used for the earphone charging case, but avoid getting the headphone speaker area wet.
If you want to clean your wipes like I do, get a big, affordable pack.I always order Care Touch 210 Wipe Box.. Again, avoid speakers.
Advanced Tip: If your headphones with white cord are covered with dirt or scratches, use a pencil eraser to erase the dark streaks.
Care must be taken when cleaning the earphone speaker. Sharp objects such as toothpicks and safety pins can cause serious damage. Plastic tools like dental floss are a safer option for scraping earwax and other deposits from the edges. When you’re done, gently wipe off any debris with a dry cloth.
One virus TikTok trick recommended Blue tack, A reusable glue putty used to hang posters as a safer option. Engrave it on a ball and push it into the earphone speaker. It should have picked up all the junk in your buds when you pulled it apart.
Here’s what you need to avoid:
Whatever you do, do not splash water on your earphones. Of course, you can use a slightly damp cloth or cleansing wipe, but when you’re done, make sure you use a dry, soft, lint-free cloth to absorb the moisture.
Avoid metal and wire brushes. It is also advisable to skip chemical detergents. Ordinary water is sufficient for the headphone and earphone cords and body.
Of course, be careful when wiping. Do not pull hard on the mesh speaker or pull it hard. Avoid cleaners here.
When you’re done, be sure to dry your earphones with a clean, soft cloth. Do not charge until you are 100% sure that there is no moisture.
Recently, a ransomware hacker struck a hospital and everything from heart machines to IV pumps stopped working. Doctors and nurses had to use pens and paper. There was no electronic medical record. But what happened when a hacker realized it was a hospital would definitely surprise you.
Listen to the podcast here Or wherever you can get a podcast. Search for my name “Komando”.
Do you have questions about your digital lifestyle?Call Kim’s national radio show Tap or click here to find it on your local radio station..You can hear or see Kim Command Show On mobile phones, tablets, TVs, or computers. Alternatively, tap Kim’s free podcast or click here.
Do you have questions about your digital lifestyle?Call Kim’s national radio show Tap or click here to find it on your local radio station..You can hear or see Kim Command Show On your phone, tablet, TV or computer. Alternatively, tap Kim’s free podcast or click here.
Copyright 2022, WestStar Multimedia Entertainment. all rights reserved. By clicking on the shopping link, you support my research. As an Amazon Associate, I earn a small commission from eligible purchases. I recommend only the products I believe in.
https://www.komando.com/kims-column/clean-your-earbuds/822490/ Your earphones are gross-this is the right way to clean them